Tag Archives: Slackware

exton, Exton Linux distributions

SlackEX (Slackware) live with Enlightenment 0.24.2 (latest version), kernel 5.9.6-exton and Refracta Snapshot (create your own Slackware distro) :: Build 201112

1 Comment

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (14.2), which I call SlackEX 14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

NEWS ABOUT SlackEX Build 201112 with the Enlightenment 0.24.2 Desktop
A new extra version of SlackEX is ready. In this version I’ve replaced Xfce4 with Enlightenment 0.24.2 – latest version. I’ve also replaced kernel 5.9.1-exton with kernel is 5.9.6-exton. This version of SlackEX is unique. You can’t find another Linux system with the latest Enlightenment version. When installing version 0.24.2 I followed the instructions here. The whole thing was very time consuming since a lot of dependencies had to be satisfied. All other packages from SlackEX Build 201105 remain. Most important Refracta Snapshot so you can build your own Slackware distro with Enlightenment 0.24.2. Study the full package LIST. Read about Enlightenment 0.24.2 features.

Screenshots
Screenshot 1 – Root’s Desktop – Enlightenment 0.24.2
Screenshot 2 – Live’s Desktop – Enlightenment 0.24.2
Screenshot 3 – Root’s Desktop when running in full screen in VMware Player – KDE (not pre-installed)

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!
exton, LINUX

Run your Slackware system with the latest available kernel – 4.14.2!

3 Comments

SlackwareNEWS 171125
Kernel 4.14.2-x86_64-exton is my newest Slackware kernel. Kernel 4.14.2 was released by Kernel.org yesterday. (November 24, 2017).

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly in the same way as Slackware’s latest kernel huge. “My” kernel 4.14.2-x86_64-exton has even more support for new hardware, etc. Kernel 4.14.2 is the latest kernel available from Kernel.org. Released 20171124.

What’s new in kernel 4.14?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.14.2-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.14.2-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.14.2-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!


Read about my Android-x86 Systems – Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Nougat!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!

exton, LINUX

Run your Slackware system with the latest available kernel – 4.13.2!

Leave a comment

SlackwareNEWS 170914
Kernel 4.13.2-x86_64-exton is my newest Slackware kernel. Kernel 4.13.2 was released by Kernel.org yesterday. (September 13, 2017).

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly in the same way as Slackware’s latest kernel huge. “My” kernel 4.13.2-x86_64-exton has even more support for new hardware, etc. Kernel 4.13.2 is the latest kernel available from Kernel.org. Released 20170913.

What’s new in kernel 4.13?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.13.2-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.13.2-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.13.2-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!


Read about my Android-x86 Systems – Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Nougat!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!

exton, LINUX

Run your Slackware installation with the latest kernel – 4.13-rc2!

Leave a comment

SlackwareNEWS 170725
Kernel 4.13-rc2-x86_64-exton is my newest Slackware kernel. Kernel 4.13-rc2 was released by Kernel.org on July 23, 2017.

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly in the same way as Slackware’s latest kernel huge. “My” kernel 4.13-rc2-x86_64-exton has even more support for new hardware, etc. Kernel 4.13-rc2 is the latest kernel available from Kernel.org. Released 20170723.

What’s new in kernel 4.13?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.13-rc2-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.13-rc2-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.13-rc2-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

Exton Linux distributions, LINUX

Run your Slackware installation with the latest kernel – 4.10.2! Released today (170312)

1 Comment

SlackwareNEWS 170312
Kernel 4.10.2-x86_64-exton is my newest Slackware kernel. The stable kernel 4.10.2 was released by Kernel.org on March 12, 2017.

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly in the same way as Slackware’s latest kernel huge. “My” kernel 4.10.2-x86_64-exton has even more support for new hardware, etc. Kernel 4.10.2 is the latest kernel available from Kernel.org. Released 20170312.

What’s new in kernel 4.10?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.10.2-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.10.2-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.10.2-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

LINUX

Run your Slackware installation with the latest kernel – 4.9!

Leave a comment

SlackwareNEWS 161223
Kernel 4.9-x86_64-exton is my newest Slackware kernel. The stable kernel 4.9 was released by Kernel.org on December 11, 2016.

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.9-x86_64-exton has even more support for new hardware, etc. Kernel 4.9 is the latest kernel available from Kernel.org. Released 20161211.

What’s new in kernel 4.9?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.9-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.9-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.9-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

LINUX

Run your Slackware installation with the latest kernel – 4.8.1!

6 Comments

SlackwareNEWS 161010
Kernel 4.8.1-x86_64-exton is my newest Slackware kernel. The stable kernel 4.8.1 was released on October 7, 2016.

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.8.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.8.1 is the latest kernel available from Kernel.org. Released 20161007.

What’s new in kernel 4.8?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.8.1-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.8.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.8.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

LINUX

Run your Slackware installation with the latest kernel – 4.7.1!

Leave a comment

SlackwareNEWS 160817
Kernel 4.7.1-x86_64-exton is my newest Slackware kernel. Kernel 4.7.1 was released yesterday (160816).

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.7.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.7.1 is the latest kernel available from Kernel.org. Released 20160816.

What’s new in kernel 4.7?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.7.1-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.7.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.7.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

LINUX

Run your Slackware installation with the latest stable kernel – 4.6.4!

3 Comments

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.6.4-x86_64-exton has even more support for new hardware, etc. Kernel 4.6.4 is the latest stable kernel available from Kernel.org. Released yesterday (20160711).

What’s new in kernel 4.6.4?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.6.4-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.6.4-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.6.4-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

Exton Linux distributions, LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.5!

2 Comments

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.5-x86_64-exton has even more support for new hardware, etc. Kernel 4.5 is the latest stable kernel available from Kernel.org. Released 20160314.

What’s new in kernel 4.5?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.5-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.5-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.5-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo