Tag Archives: Refracta Installer

exton, Exton Linux distributions

Exton|Defender SRS based on Fedora Rawhide (fc 39/40) with Cinnamon and Deepin Desktops which you can completely change and rebuild :: Build 231109

Leave a comment

Description
Exton|Defender SRS is a Linux system available as a Live DVD based on Fedora Rawhide, 64bit. (Rawhide is the development version of Fedora). Exton|Defender is for administrating or repairing your system and data after a crash. Exton|Defender aims to provide an easy way to carry out admin tasks on your computer, such as creating and editing the hard disk partitions. It comes with a lot of Linux software such as system tools and basic tools (editors, Midnight Commander, network tools). Exton|Defender can, however, also be used as a normal Linux Desktop System. It requires no hard drive installation, but can easily be installed to hard drive if you want. Desktop environments: Special versions of Deepin and Cinnamon developed by Fedora.

231111: HAVE I GOT NEWS FOR YOU!
Today I discovered (by chance) that you can install Exton|Defender Build 231109 to a USB stick with persistence! I.e. all your system changes will be saved directly on the USB stick. Even big system upgrades! That will make it unnecessary to install Exton|Defender to hard drive (which can be a bit tricky). Just run the System from a big enough USB stick and be happy! Do it like this:
1. Use Rufus 4.3 for the installation.
2. Set a Persistent partition size of about 3GB before you start the installation. Watch this screenshot…
3. Run Exton|Defender from your created USB stick. Be sure boot up the System in Legacy mode. You can run the System also in UEFI mode, but unfortunately persistence won’t be enabled then.
4. Test run Exton|Defender and change some things. For example new bookmarks in Firefox. Reboot!
5. You changes should be left if you have done what I said above. Now you can upgrade the whole system with “sudo dnf upgrade –refresh”. About 230 packages can be upgraded as of 231111. Watch this screenshot…
6. Finally you can make a new ISO (your own) if you want. Be sure to change /etc/refractasnapshot.conf first. You must see to that the new ISO file and the work environment will be created on another partition. Watch this screenshot…
7. Start Refractasnapshot in a terminal with the command “sudo /usr/bin/refractasnapshot”. Follow the instructions. After a few minutes your ISO will be ready. Watch this screenshot…

NEWS 231109 ABOUT Exton|Defender Rawhide (Fedora 39/40)
I’ve made a new version of Exton|Defender 64 bit based on Fedora “Rawhide” (the development version of Fedora). I.e. upcoming Fedora 39/40. This new version uses the Cinnamon and Deepin Desktops. Log in to the Desktop environment you prefer. Study all other installed packages.
MOST IMPORTANT CHANGE: I’ve finally managed to install Refracta Snapshot in Exton|Defender, which means that you can create your own Fedora Rawhide System! I mean change everything to your liking and then create a new ISO.
NOTE1: For Refracta Snapshot to work you have to run “my” kernel 6.5.3-amd64-exton when Refracta Snapshot is running. (It won’t work with Fedora’s kernel 6.7).
NOTE2: Version 231109 of Exton|Defender can run on really old computers. As an example I could run it on my 17 years old laptop Acer Aspire 5102 WLMi.

THE IMPORTANCE OF Exton|Defender being based on upcoming fc 39/40
Programs won’t “crash” or anything like that. And I haven’t noticed any “bugs”. That said you should of course be a bit careful. This version of Exton|Defender is for people who like to use “cutting-edge” software and the latest kernels etc. You will always have the latest Linux/Fedora software installed if you regularly run the command sudo dnf upgrade ‐‐refresh.

SCREENSHOTS
Screenshot 1 – Exton|Defender  – running in full screen in VirtualBox
Screenshot 2 – Anaconda (Fedora’s Installer) has started
Screenshot 3 – Refracta Installer has started
Screenshot 4 – Deepin DE is used
Screenshot 5 – Refracta Snapshot has started

READ MORE…

Android-x86 Custom

android-logo

Read about my Android-x86 Systems 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

exton, Exton Linux distributions

ExTiX Deepin 23.9-2 Live based on Deepin 23 BETA2 (latest) with Refracta Snapshot and kernel 6.5.4-extix-amd64-desktop-hwe :: Build 230924

Leave a comment

NEWS 230924 ABOUT ExTiX with Deepin 23 BETA2
I’ve released a new version of ExTiX Deepin today (230924). The previous ExTiX Deepin 23 version is from 230903. This ExTiX Build is based on Deepin 23 BETA2 (latest version) released by Deepin Technology on September 18, 2023. Please read the Release Notes. As you can see the developers urge people to try Deepin BETA2 in a non-production environment! I must say, though, that I haven’t discovered any “bugs”. And the installed programs won’t “crash” or anything like that. On the contrary ExTiX Deepin 23.9-2 with the Deepin DE 23 BETA2 works pretty well I would say. I have nevertheless kept ExTiX 22.12 with Deepin 20.8 on the server. Deepin 20.8/20.9 is the stable version released 221208. ExTiX 23.9-2 uses kernel 6.5.4-extix-amd64-desktop-hwe. ExTiX 23.9-2 works in the same way as all other ExTiX versions. I.e. you can install it to hard drive while running the system live. Use Refracta Installer for that. You can also create your own live installable Deepin 23 system with Refracta Snapshot. (Using ExTiX 23.9-2 as a “base system”). So easy that a ten year old child can do it!

Study all installed packages in ExTiX Deepin 23.9-2.

Used KERNEL
My special kernel 6.5.4-extix-amd64-desktop-hwe corresponding Kernel.org’s kernel 6.5.4.

What’s new in Linux kernel 6.5?

Please read (and watch) a full enthusiastic review of ExTiX 22.12 with Deepin 20.8…

And here is another YouTube review of ExTiX 23.9 with Deepin 23 BETA…

SCREENSHOTS
1. ExTiX 23.9-2 running in full screen in VirtualBox (VirtualBox Guest Additions are pre-installed)
2. ExTiX Deepin 23.9-2 (first) Desktop after boot on EFI computers

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

RLRH EXTON Linux Live System compatible with Rocky Linux 9.2 and Red Hat Enterprise Linux® :: Build 230922

Leave a comment

ABOUT RLRH EXTON Build 230922
RLRH EXTON is a LIVE version of Rocky Linux 9.2 which is also compatible with Red Hat Enterprise Linux®. Rocky Linux is an open-source enterprise operating system designed to be 100% bug-for-bug compatible with Red Hat Enterprise Linux®. It is under intensive development by the community.

LIVE LINUX SYSTEM
You can run RLRH EXTON live (i.e. from a DVD or USB stick) on EFI and non-EFI computers. (Rocky Linux is not a LIVE system). From Wikipedia: A live CD or live DVD is a CD-ROM or DVD-ROM containing a bootable computer operating system. Live CDs are unique in that they have the ability to run a complete, modern operating system on a computer lacking mutable secondary storage, such as a hard disk drive. 

CREATE YOUR OWN Rocky Linux System
You can also create your own Rocky Linux system using Refracta Snapshot, which is pre-installed. I.e. change everything to your liking and then create a new ISO. That can be done after a hard drive installation. If you have plenty of RAM it is also possible to create a new ISO while running RLRH EXTON live.

MORE ABOUT RLRH EXTON
Gnome 40 is used as DE. Two kernels are installed – 6.5.3-1.el9.elrepo.x86_64 and 6.5.3-amd64-exton. Use the one you prefer (after a hard drive installation).

INSTALL TO HARD DRIVE
Install to hard drive during a live session using Refracta Installer. Do it like this in VirtualBox or VMware:
1. Prepare an install partition of about 3OGB and a SWAP partition of 2GB in advance.
2. Open up a terminal as root and run the command refractainstaller. Follow the instructions – watch screenshot 1.
3. Refrain from installing a boot loader (Grub2) – watch screenshot 2. Refracta Installer is made for Debian systems so installing Grub2 won’t work. You’ll have to chroot to do that.
4. Chroot and install Grub2. Read my INSTRUCTION. I.e. run command 1) – 8). Watch this screenshot…
IMPORTANT NOTE: You shall not use Refracta Installer for installing Grub2 on EFI computers. If you already have one Linux system installed on your computer you can just edit /boot/grub/grub.cfg or /etc/grub.d/40_custom so that RLRH EXTON can boot. Read this INSTRUCTION… 
You may also benefit from reading my instruction How-to dual-boot, triple-boot or multi-boot Linux with Windows in a simple way and be happy…

USING REFRACTA SNAPSHOT
Open up a terminal as root and run the command refractasnapshot. The just follow the instructions given by the program. Watch this screenshot when Refracta Snapshot has started and this screenshot when everything is ready. The whole process will only take a few minutes to complete. You’ll find your new ISO in /home/snapshot.
NOTE 1: You will get a message saying that your ISO won’t boot on EFI computers. Just ignore it. I have fixed this issue.

PASSWORDS
Log in as the normal user user with password live or as root with password root. While logged in as user you can use Sudo to become root.

Samba client
You can use Gnome Files (Nautilus File Manager) to connect to your Windows computers in your Home Network. Watch this screenshot.

Wireless connections
Normally NetworkManager works very well in RLRH EXTON. Just add your WiFi Network password and connect – watch this screenshot…

Package Management in RPM-based distros
Read this instruction about DNF. DNF is the successor program of YUM (Yellowdog Updater Modified) and is the default package manager on Fedora and RHEL. The name DNF is short for Dandified YUM.
Basically there are only three commands to use:
1. sudo dnf upgrade ‐‐refresh
2. sudo dnf install MyUsefulPackage
3. sudo dnf remove MyBadPackage

VirtualBox/VMware
VirtualBox Guest Additions are pre-installed so you can run RLRH EXTON in full screen both in VirtualBox and VMware.

Study all installed packages in RLRH EXTON Build 230922.

NOTE: You can only use Refracta Snapshot while “my” kernel 6.5.3-amd64-exton is running.

How to change kernels
After a hard drive installation you can change to one of Rocky Linux original kernels by running this command:
sudo dracut ‐‐kver 6.5.3-1.el9.elrepo.x86_64
(Then reboot of course).

UNIQUE
RLRH EXTON is unique. I.e. there is no other live version of Rocky Linux around (as far as I know).

SCREENSHOTS
1. The GDM login screen. If you want to log in as root to Gnome you shall choose “Not listed?”.
2. Showing how to fix a wired Network connection (sometimes necessary).
3. Showing how to mount a NTFS partition. The package ntfs-3g has to be installed first. Do it with the command sudo dnf install ntfs-3g. (I forgot to do that).
4. RLRH EXTON is running in VMware.

DOWNLOAD
RLRH EXTON 64bit version 230922 can be downloaded from SourceForge.net – Fast, secure and free downloads from the largest Open Source applications and software directory.

md5sum for the RLRH EXTON ISO, which is of 3000MB

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

ExTiX Deepin 23.9 Live based on Deepin 23 BETA (latest) with Refracta Snapshot and kernel 6.5.0-extix-amd64-desktop-hwe :: Build 230903

Leave a comment

NEWS 230903 ABOUT ExTiX with Deepin 23 BETA
I’ve released a new version of ExTiX Deepin today (230903). The previous ExTiX Deepin 23 version is from 230403. This ExTiX Build is based on Deepin 23 BETA (latest version) released by Deepin Technology in May 2023. Please read the Release Notes. As you can see the developers urge people to try Deepin BETA in a non-production environment! I must say, though, that I haven’t discovered any “bugs”. And the installed programs won’t “crash” or anything like that. On the contrary ExTiX Deepin 23.9 with the Deepin DE 23 works pretty well I would say. I have nevertheless kept ExTiX 22.12 with Deepin 20.8 on the server. Deepin 20.8/20.9 is the stable version released 221208. ExTiX 23.9 uses kernel 6.5.0-extix-amd64-desktop-hwe. ExTiX 23.9 works in the same way as all other ExTiX versions. I.e. you can install it to hard drive while running the system live. Use Refracta Installer for that. You can also create your own live installable Deepin 23 system with Refracta Snapshot. (Using ExTiX 23.9 as a “base system”). So easy that a ten year old child can do it!

Used KERNEL
My special kernel 6.5.0-extix-amd64-desktop-hwe corresponding Kernel.org’s kernel 6.5.

What’s new in Linux kernel 6.5? 

Upgrade Deepin 23 to BETA 2 or to the stable 23 version of Deepin
Future upgrades are very easy to perform. Just run the command sudo apt update followed by sudo apt upgrade. The BETA 2 version of Deepin will be released later in September 2023.

Please read (and watch) a full enthusiastic review of ExTiX 22.12 with Deepin 20.8…

SCREENSHOTS
1. ExTiX 23.9 running in full screen in VirtualBox (VirtualBox Guest Additions are pre-installed)
2. ExTiX Deepin 23.9 Desktop
3. ExTiX 23.9 running Refracta Snapshot
4. ExTiX 23.9 LightDM Login Screen

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

LFA (Linux For All) 64bit Live System – Build 230608 – with Gnome 44 and kernel 6.4.0-rc4-amd64-exton :: Create you own LFA/Ubuntu installable 23.04 system!

Leave a comment

Linux For All (LFA) Build 230608 with Gnome 44
is a simple remaster of Ubuntu 23.04, code-named Lunar Lobster. It’s a total rebuild. I.e. nothing is left of the old LFA system. NOTE: Ubuntu 23.04 will be supported (only) until January 2024. To be able to upgrade Gnome from version 42.4 to 44 I first had to upgrade Ubuntu from version 22.04 (supported until April 2027) to 23.04.

NEWS ABOUT LFA Build 230608
1. All packages the ordinary Linux user can wish for are pre-installed. Study the full packages list.
2. Kernel 6.4.0-rc4-amd64-exton is used. You can of course switch to Ubuntu’s original kernel if you prefer that.
3. The Desktop environment is Gnome 44. (Ubuntu’s original DE).
4. The main Web Browser is Firefox. So you can watch Netflix!
5. I have included Refracta tools (Refracta Snapshot) to make it possible for you to create your own installable Ubuntu 23.04 Live System once you have installed LFA to hard drive.
6. You can run LFA fast in RAM. Use boot alternative 2 Load to RAM – see below.
7. VirtualBox Guest Additions are pre-installed , which means (among other things) that you can run LFA in VirtualBox in full screen. Watch this screenshot.

What’s new in kernel 6.4?

SCREENSHOTS
Screenshot 1 – Running Samba to reach Windows computers
Screenshot 2 – Refracta Installer has ended
Screenshot 3 – Running LFA in VMware
Screenshot 4 – Running in full screen in VirtualBox

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

ExTiX 23.5-2 – “The Ultimate Linux System” – based on Ubuntu 23.04 with LXQt 1.3, Refracta Snapshot and kernel 6.3.1-amd64-exton :: Build 230530

Leave a comment

ExTiX 23.5-2 LXQt – Build 230530
I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 23.5-2 LXQt Live System. (The previous LXQt version was 22.8 from 220814). ExTiX 23.5-2 is based on Ubuntu 23.04 (Lunar Lobster)! Ubuntu 23.04 will be supported (only) until January 2024. To be able to upgrade LXQt from version 0.17 to 1.3 I first had to upgrade Ubuntu from version 22.04 (supported until April 2027) to 23.04. The best thing with ExTiX 23.5-2 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu system. So easy that a ten year child can do it! One other very good thing with this version of ExTiX is that it is quite light. The ISO file is of only 2050 MB, which means that you can run the system super fast from RAM. When the boot process is ready you can eject the DVD or USB stick. Use Boot alternative 3 or Advanced options… >> load to RAM.

ABOUT
ExTiX 23.5-2 LXQt System 64 bit is based on Debian Sid and Ubuntu 23.04. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 1.3 (latest version, released 230415). LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for installation to UEFI-enabled computers. You shall use Refracta Installer for that.

SCREENSHOTS
1. ExTiX LXQt – root’s Desktop
2. ExTiX LXQt – user’s Desktop
3. ExTiX 23.5-2 running in full screen in VirtualBox
4. ExTiX LXQt running in VMware

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

SlackEX 15.0 (Slackware 15.0) Live System with KDE Plasma 5.27.5 (latest), Refracta Snapshot and kernel 6.3.1-amd64-exton :: Build 230525

Leave a comment

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remasters of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live DVD, are however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX 15.0 stable Build 230525 with KDE Plasma 5.27.5 (latest) as DE
A new extra version of SlackEX is ready. It is based on Slackware 15.0 stable released 220203. In this version I’ve installed KDE Plasma 5.27.5 (latest version released 230509). Plasma 5.27 is a LTS (Long Term Support) version. Kernel 6.3.1-amd64-exton is used. The most important package installed is Refracta Snapshot. With that you can build your own Slackware distribution with Plasma 5.27.5. KDE is one of Slackware’s official Desktop Environments. The other one is Xfce4. NOTE1: You can run SlackEX Build 230525 as the normal user user or as root. The password for root is root. The password for user is live. NOTE2: You can run SlackEX Build 230525 on UEFI and non-Uefi computers. You can also run SlackEX live super fast from RAM. NOTE3: If you want to run SlackEX as root you shall choose “Other” using SDDM Login Manager. The password for root is root.

SCREENSHOTS
Screenshot 1 – root’s Desktop – KDE Plasma
Screenshot 2 – SlackEX running in VirtualBox when Guest additions have been installed (pre-installed now)
Screenshot 3 – root’s Desktop when running in VMware Player
Screenshot 4 – Spotify is running in Firefox
Screenshot 5 – showing System Info

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

Run latest Slackware 64 bit (15.0 STABLE) with Xfce4 live and create your own live installable Slackware 15.0 system with Refracta Snapshot!

Leave a comment

About SlackEX 15.0 64 bit Build 230521 (Xfce4), Build 221210 (Enlightenment/Xfce4) and Build 221214 (LXQt)

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live System, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX BUILD 230521 with the Xfce4 DESKTOP ENVIRONMENT (DE)
A new version of SlackEX is ready. It is based on Slackware 15.0 STABLE released 220202 with Xfce4 as DE. The most important package installed is Refracta Snapshot. With that you can build your own Slackware 15.0 distribution. Xfce4 is one of Slackware’s official Desktop environments. The other one is KDE. Kernel 6.3.1-amd64-exton is used in this SlackEX Build. To be able to use Refracta Snapshot you’ll have to use said kernel. Otherwise you can (of course) replace “my” kernel with Slackware’s original kernel. Study the full package LIST.

Update/Upgrade the System
As regards my other two SlackEX Builds you can easily upgrade the systems to the present state of Slackware 15.0 stable. Just run the command sudo slackpkg update followed by sudo slackpkg upgrade-all.

SCREENSHOTS
Screenshot 1 – root’s Desktop with Xfce4 as DE
Screenshot 2 – SlackEX running in VirtualBox in full screen when Guest additions have been installed
Screenshot 3 – showing a Samba connection
Screenshot 4 – Refracta Snapshot is running in VirtualBox

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

ExTiX Mini Build 230510 with LXQt and kernel 6.3.1-amd64-exton :: Run it super fast from RAM and/or create your own Linux system using Refracta Snapshot!

Leave a comment

NEWS 230510 ABOUT ExTiX LXQt Mini 23.5, Build 230510
I’ve made a new updated “mini” version of ExTiX – The Ultimate Linux System. It is based on Ubuntu 22.04 LTS Jammy Jellyfish. The ISO file is of only 1550 MB, which is good if you want to run the system super fast from RAM. It should be enough with 2GB RAM. When the boot process is ready you can eject the DVD or USB stick. Use Boot alternative 2. The best thing with ExTiX 23.5 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu 22.04 system. So easy that a ten year child can do it! ExTiX 23.5 uses kernel 6.3.1-amd64-exton. Ubuntu 22.04 LTS will be supported until April 2027. That’s why ExTiX 23.5 isn’t based on Ubuntu 23.04.

Study all pre-installed packages in ExTiX 23.5.

More about ExTiX 23.5
This ExTiX version uses LXQt as Desktop environment. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for older UEFI-enabled computers and VirtualBox/VMware. When running ExTiX 23.5 in VirtualBox you can do it in full screen since VirtualBox Guest Additions are pre-installed. Watch this screenshot.

SCREENSHOTS
ExTiX version 230510 LXQt root Desktop
ExTiX LXQt running Refracta Installer
ExTiX LXQt running in VMware
ExTiX LXQt running in full screen in VirtualBox

Watch a YouTube video about ExTiX 22.5 Mini…

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!