Tag Archives: kernel.org

exton, LINUX

Run your Slackware system with the latest available kernel – 4.13.2!

Leave a comment

SlackwareNEWS 170914
Kernel 4.13.2-x86_64-exton is my newest Slackware kernel. Kernel 4.13.2 was released by Kernel.org yesterday. (September 13, 2017).

I have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly in the same way as Slackware’s latest kernel huge. “My” kernel 4.13.2-x86_64-exton has even more support for new hardware, etc. Kernel 4.13.2 is the latest kernel available from Kernel.org. Released 20170913.

What’s new in kernel 4.13?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.13.2-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.13.2-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.13.2-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!


Read about my Android-x86 Systems – Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Nougat!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!

LINUX

Run your Ubuntu/Debian 64 bit system with the latest stable kernel – 4.4.0!

3 Comments

linuxI have compiled yet another Ubuntu/Debian kernel for 64 bit systems. This time kernel 4.4.0-0-exton, equivalent to Kernel.org’s latest stable kernel 4.4.0 released 160110.

What’s new in kernel 4.4?

Install kernel 4.4.0-0-exton in Ubuntu/Debian based distributions
My self-compiled Ubuntu kernels can be used in all types of modern Ubuntu systems, including Mint. They can even be used in Debian Jessie (Debian 8.2) and Debian Stretch (upcoming Debian 9). If you want to use my kernel 4.4.0-0-exton for 64 bit systems, you can DOWNLOAD it from here.

md5sum for ubuntu-kernel-64bit-4.4.0-0-exton.zip which is of 65,9 MB.

Installation instructions
Open the zip-file with WinZip, WinRAR or 7-Zip. Or run this command: unzip ubuntu-kernel-64bit-4.4.0-0-exton.zip. Go into the folder ubuntu-kernel-64bit-4.4.0-0-exton and run this command:
sudo dpkg -i *.deb

Then: Run command sudo update-grub (if you use Grub2).

Nvidia
It is possible to install Nvidia’s proprietary drivers if you use “my” kernel 4.4.0-0-exton. Could be useful if you like to play games. Please read this instruction. The Nvidia drivers in for example Ubuntu’s repositories – “Current” etc. – can’t be used. It is supposed to be “impossible” to install Nvidia’s latest drivers when running kernel 4.0 – 4.4 without “patches” etc. On the other hand it’s a fact that kernel 4.4 has better support for the open-source Nvidia driver Nouveau than any other older kernel.

A small clarification
“My” kernel 4.4.0-0-exton is compiled exactly the same way as all official Ubuntu kernels. That is, The Ubuntu Way. If not, the kernel would not function in a Ubuntu/Debian system.

Good luck!

LINUX

Run your Ubuntu/Debian 64 bit system with the latest stable kernel!

Leave a comment

linuxI have compiled yet another Ubuntu/Debian kernel for 64 bit systems. This time kernel 4.3.0-4-exton, equivalent to Kernel.org’s latest stable kernel 4.3.2 released 151210.

What’s new in kernel 4.3?

Install kernel 4.3.0-4-exton in Ubuntu/Debian based distributions
My self-compiled Ubuntu kernels can be used in all types of modern Ubuntu systems, including Mint. They can even be used in Debian Jessie (Debian 8.2). If you want to use my kernel 4.3.0-4-exton for 64 bit systems, you can DOWNLOAD it from here.

md5sum for ubuntu-kernel-64bit-4.3.0-4-exton.zip which is of 65,7 MB.

Installation instructions
Open the zip-file with WinZip, WinRAR or 7-Zip. Or run this command: unzip ubuntu-kernel-64bit-4.3.0-4-exton.zip. Go into the folder ubuntu-kernel-64bit-4.3.0-4-exton and run this command:
sudo dpkg -i *.deb

Then: Run command sudo update-grub (if you use Grub2).

Nvidia
It is possible to install Nvidia’s proprietary drivers if you use “my” kernel 4.3.0-4-exton. Could be useful if you like to play games. Please read this instruction. The Nvidia drivers in for example Ubuntu’s repositories – “Current” etc. – can’t be used. It is supposed to be “impossible” to install Nvidia’s latest drivers when running kernel 4.0 – 4.3 without “patches” etc. On the other hand it’s a fact that kernel 4.3 has better support for the open-source Nvidia driver Nouveau than any other older kernel.

A small clarification
“My” kernel 4.3.0-4-exton is compiled exactly the same way as all official Ubuntu kernels. That is, The Ubuntu Way. If not, the kernel would not function in a Ubuntu/Debian system.

Good luck!

LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.3.1!

Leave a comment

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.3.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.3.1 is the latest stable kernel available from Kernel.org. Released yesterday (20151209).

What’s new in kernel 4.3.1?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.3.1-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.3.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.3.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.2.2!

1 Comment

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.2.2-x86_64-exton has even more support for new hardware, etc. Kernel 4.2.2 is the latest stable kernel available from Kernel.org. Released 20150929.

What’s new in kernel 4.2?
One million new lines of code in kernel 4.2! (The biggest kernel release ever according to Linus Torvalds).

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.2.2-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.2.2-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.2.2-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

LINUX

Run your Ubuntu/Debian 64 bit system with the latest kernel!

10 Comments

logo-linux-exton-netI have compiled yet another Ubuntu/Debian kernel for 64 bit systems. This time kernel 4.2.0-7-exton, equivalent to Kernel.org’s latest stable kernel 4.2 released 150830.

What’s new in kernel 4.2? One million new lines of code in kernel 4.2! (The biggest kernel release ever according to Linus Torvalds).

Install kernel 4.2.0-7-exton in Ubuntu/Debian based distributions
My self-compiled Ubuntu kernels can be used in all types of modern Ubuntu systems, including Mint. They can even be used in Debian Jessie (Debian 8.1). If you want to use my kernel 4.2.0-7-exton for 64 bit systems, you can DOWNLOAD it from here.

md5sum for ubuntu-kernel-64bit-4.2.0-7-exton.zip which is of 63,3 MB.

Installation instructions
Open the zip-file with WinZip, WinRAR or 7-Zip. Or run this command: unzip ubuntu-kernel-64bit-4.2.0-7-exton.zip. Go into the folder ubuntu-kernel-64bit-4.2.0-7-exton and run this command:
sudo dpkg -i *.deb

Then: Run command sudo update-grub (if you use Grub2).

Nvidia
It is possible to install Nvidia’s proprietary drivers if you use “my” kernel 4.2.0-7-exton. Could be useful if you like to play games. Please read this instruction. The Nvidia drivers in for example Ubuntu’s repositories – “Current” etc. – can’t be used. It is supposed to be “impossible” to install Nvidia’s latest drivers when running kernel 4.0 – 4.2 without “patches” etc. On the other hand it’s a fact that kernel 4.2 has better support for the open-source Nvidia driver Nouveau than any other older kernel.

A small clarification
“My” kernel 4.2.0-7-exton is compiled exactly the same way as all official Ubuntu kernels. That is, The Ubuntu Way. If not, the kernel would not function in a Ubuntu/Debian system.

Good luck!

LINUX

Run your Ubuntu/Debian 64 bit system with kernel 4.1.3!

1 Comment

logo-linux-exton-netI have compiled yet another Ubuntu/Debian kernel for 64 bit systems. This time kernel 4.1.0-3-exton, equivalent to Kernel.org’s stable kernel 4.1.3.

What’s new in kernel 4.1? (Linux 4.1 is a major update to the Linux kernel)

Install kernel 4.1.0-3-exton in Ubuntu/Debian based distributions
My self-compiled Ubuntu kernels can be used in all types of modern Ubuntu systems, including Mint. They can even be used in Debian Jessie (Debian 8.1). If you want to use my kernel 4.1.0-3-exton for 64 bit systems, you can DOWNLOAD it from here.

md5sum for ubuntu-kernel-64bit-4.1.0-3-exton.zip which is of 62,8 MB.

Installation instructions
Open the zip-file with WinZip, WinRAR or 7-Zip. Or run this command: unzip ubuntu-kernel-64bit-4.1.0-3-exton.zip. Go into the folder ubuntu-kernel-64bit-4.1.0-3-exton and run this command:
sudo dpkg -i linux-headers-4.1.0-3_4.1.0-3.3_all.deb \
linux-headers-4.1.0-3-exton_4.1.0-3.3_amd64.deb \
linux-image-4.1.0-3-exton_4.1.0-3.3_amd64.deb

Then: Run command sudo update-grub (if you use Grub2).

Nvidia
It is possible to install Nvidia’s proprietary drivers if you use “my” kernel 4.1.0-3-exton. Could be useful if you like to play games. Please read this instruction. The Nvidia drivers in for example Ubuntu’s repositories – “Current” etc. – can’t be used. It is supposed to be “impossible” to install Nvidia’s latest drivers when running kernel 4.0 – 4.1 without “patches” etc. On the other hand it’s a fact that kernel 4.1 has better support for the open-source Nvidia driver Nouveau than any other older kernel.

A small clarification
“My” kernel 4.1.0-3-exton is compiled exactly the same way as all official Ubuntu kernels. That is, The Ubuntu Way. If not, the kernel would not function in a Ubuntu/Debian system.

Good luck!

Exton Linux distributions, LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.1.1!

Leave a comment

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.1.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.1.1 is the latest stable kernel available from Kernel.org. Released 20150629.

What’s new in kernel 4.1? (Linux 4.1 is a major update to the Linux kernel)

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.1.1-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.1.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.1.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

linux-logo-exton-black-white-bg-www

LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.0.4!

Leave a comment

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.0.4-x86_64-exton has even more support for new hardware, etc. Kernel 4.0.4 is the latest stable kernel available from Kernel.org. Released 20150517.

What’s new in kernel 4.0?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.0.4-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.0.4-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.0.4-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

linux-logo-exton-black-white-bg-www

LINUX

Run your Ubuntu/Debian 64 bit system with the latest stable kernel – 3.19.0!

Leave a comment

TuxI have compiled yet another Ubuntu/Debian kernel for 64 bit systems. This time kernel 3.19.0-5-exton, equivalent to Kernel.org’s stable kernel 3.19.0, released 150209.

Feature OVERVIEW for the Linux 3.19 kernel

Install kernel 3.19.0-5-exton in Ubuntu/Debian based distributions
My self-compiled Ubuntu kernels can be used in all types of modern Ubuntu systems, including Mint. They can even be used in Debian Jessie (upcoming Debian 8). If you want to use my kernel 3.19.0-5-exton for 64 bit systems, you can DOWNLOAD it from here.

md5sum for ubuntu-kernel-64bit-3.19.0-5-exton.zip, which is of 62,0 MB.

Installation instructions
Open the zip-file with WinZip, WinRAR or 7-Zip. Or run this command: unzip ubuntu-kernel-64bit-3.19.0-5-exton.zip. Go into the folder ubuntu-kernel-64bit-3.19.0-5-exton and run this command:
sudo dpkg -i linux-headers-3.19.0-5_3.19.0-5.5_all.deb \
linux-headers-3.19.0-5-exton_3.19.0-5.5_amd64.deb \
linux-image-3.19.0-5-exton_3.19.0-5.5_amd64.deb

Then: Run command sudo update-grub (if you use Grub2).

Nvidia
It is possible to install Nvidia’s proprietary drivers if you use “my” kernel 3.19.0-5-exton. Could be useful if you like to play games. Please read this instruction. The Nvidia drivers in for example Ubuntu’s repositories – “Current” etc. – can’t be used. It is supposed to be “impossible” to install Nvidia’s latest drivers when running kernel 3.17 – 3.19 without “patches” etc. On the other hand it’s a fact that kernel 3.19 has better support for the open-source Nvidia driver Nouveau than any other older kernel.

A small clarification
“My” kernel 3.19.0-5-exton is compiled exactly the same way as all official Ubuntu kernels. That is, The Ubuntu Way. If not, the kernel would not function in a Ubuntu/Debian system.

Good luck!