exton, LINUX

Run your Ubuntu/Debian 64 bit system with the latest kernel – 4.18.3!

Leave a comment

linuxI have compiled yet another Ubuntu/Debian kernel for 64 bit systems. This time kernel 4.18.3-exton, equivalent to Kernel.org’s latest kernel 4.18.3 released yesterday (180818).

What’s new in Linux kernel 4.18?

Install kernel 4.18.3-exton in Ubuntu/Debian based distributions
My self-compiled Ubuntu kernels can be used in all types of modern Ubuntu systems, including Mint. They can even be used in Debian Stretch (Debian 9) and Debian Buster (upcoming Debian 10). If you want to use my kernel 4.18.3-exton for 64 bit systems, you can DOWNLOAD it from here.

Installation instructions
Open the zip-file with WinZip, WinRAR or 7-Zip. Or run this command: unzip ubuntu-kernel-64bit-4.18.3-exton.zip. Go into the folder ubuntu-kernel-64bit-4.18.3-exton and run this command:
sudo dpkg -i *.deb

Then: Run command sudo update-grub (if you use Grub2).

Nvidia
It is possible to install Nvidia’s proprietary drivers if you use “my” kernel 4.18.3-exton. Could be useful if you like to play games. The Nvidia drivers in for example Ubuntu’s repositories – “Current” etc. – can’t be used. It is supposed to be “impossible” to install Nvidia’s latest drivers when running kernel 4.18 without “patches” etc. On the other hand it’s a fact that kernel 4.18 has better support for the open-source Nvidia driver Nouveau than any other older kernel.

A small clarification
“My” kernel 4.18.3-exton is compiled (almost) the same way as all official Ubuntu kernels. That is, The Ubuntu Way. If not, the kernel would not function in a Ubuntu/Debian system.

Good luck!


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

exton, Exton Linux distributions, LINUX

ExTiX 18.8-2 with Budgie 10.4 Desktop, Refracta Tools and kernel 4.18.0-exton – Build 180819 for older non-efi computers

Leave a comment

About ExTiX 18.8-2 with the Budgie Desktop
I’ve made a new extra version of ExTiX with Budgie Desktop. Budgie is focused on simplicity and elegance. Designed with the modern user in mind. Only a minimum of packages are installed in ExTiX Budgie. You can of course install all packages you want. Even while running ExTiX Budgie live. I.e. from a DVD or USB stick. Study all installed packages in ExTiX Budgie.

ABOUT ExTiX
All four ExTiX systems are based on Ubuntu and Debian. ExTiX Budgie is based on Ubuntu 18.04.1 LTS. This ExTiX Budgie Build is for installation to non UEFI-enabled computers and VirtualBox/VMware.

Used KERNEL
My special kernel 4.18.0-exton corresponding Kernel.org’s kernel 4.18.

What’s new in Linux kernel 4.18?

SCREENSHOTS
ExTiX Budgie Desktop with Spotify running
ExTiX Budgie Desktop – live
ExTiX Budgie Desktop – root
ExTiX Budgie running in VMware

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

exton, Exton Linux distributions, LINUX

ExTiX Deepin 18.8 Build 180815 for non-efi computers – an extra version of ExTiX

Leave a comment

NEWS 180815 ABOUT ExTiX Deepin 18.8
I’ve made an extra version of ExTiX Deepin 18.8 for NON-UEFI computers, which means that you can use the Calamares Installer also in VirtualBox and/or VMware. Build 180807 of ExTiX Deepin 18.8 is for UEFI computers. Using Build 180815 you can install ExTiX 18.8 Deepin in any language in for example VirtualBox, change everything to your liking and then create a new ISO with Refracta Snapshot (pre-installed). I.e. you can create your very own live and installable Linux/Ubuntu system. That can be done even in VirtualBox and/or VMware. Please note that the whole Refracta process (creating your new ISO) will only take 10 – 15 min! So simple that even a 10 year child can do it.

KERNEL
ExTiX 18.8 Build 180815 uses kernel 4.18.0-exton corresponding Kernel.org’s latest kernel 4.18, released 180812.

Why two versions of ExTiX 18.8 Deepin?
The thing is that the packages grub-pc and grub-efi-amd64 can’t be installed at the same time. To be able to use Calamares Installer on non-efi computers grub-pc has to be installed.

SCREENSHOT
ExTiX Deepin (NON-UEFI) Build 180815 being installed in VirtualBox using Calamares Installer

READ MORE…

exton, Exton Linux distributions, LINUX

DebEX KDE/Plasma with Plasma 5:47, Refracta tools, Calamares Installer and kernel 4.18.0-rc8-exton – Build 180814

Leave a comment

ABOUT DebEX
All three DebEX systems/distributions are a based on Debian Buster/Sid (upcoming Debian 10). Budgie Desktop 10.4 is used as Desktop environment in DebEX Barebone/Budgie. Gnome 3.26 and Mate 1.18 are used in DebEX Gnome. KDE Plasma Desktop 5:47 is used in DebEX KDE. The system language is English (in all three versions of DebEX).

NEWS 180814 about DebEX KDE Plasma – a Refracta Build
I have made two new versions of DebEX KDE Plasma Live DVD – one efi and one non-efi version. They replace version 180221. It’s a pure Debian system. (Unstable/Experimental). I.e.: There are no Ubuntu or Kubuntu elements involved. DebEX KDE Plasma uses the KDE Plasma Desktop 5:47 as Desktop environment. Both versions use kernel 4.18.0-rc8-exton – (4.18-rc8). I have replaced Wicd with NetworkManager. It works better. I have replaced Google Chrome with Iceweasel (Firefox) 52.9 (for Netflix). I’ve also added SMPlayer – an alternative to Vlc. (SMPlayer is a free media player for Windows and Linux with built-in codecs that can play virtually all video and audio formats. It doesn’t need any external codecs. Just install SMPlayer and you’ll be able to play all formats without the hassle to find and install codec packs). All other installed packages have also been updated to the latest version of 180814. Study the full package list. MOST IMPORTANT CHANGES: I have replaced Refracta Installer with Calamares 3.2.1 Installer Framework. Now you can choose language when the installation starts. When it’s ready everything will be in your chosen language! You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. Then download and run debex-64bit-plasma-refracta-calamares-non-efi-1210mb-180814.iso. Watch a movie about the Calamares installation process of DebEX KDE in VirtualBox. You can use Calamares to install DebEX KDE on all non-efi computers without problems. VirtualBox and VMware are like non-efi computers.

MOVIE about Calamares Installer
Watch a movie about the Calamares installation process in VirtualBox.

Important about Refracta
You can use the Refracta tools (pre-installed in all three versions of DebEX) to create your own installable Debian Live DVD once you have installed DebEX to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta it will look like this. You don’t even have to install DebEX to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Debian system while running DebEX from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 10 – 50 min! You’ll find the ISO in /home/debex.

Why two versions of DebEX KDE?
The thing is that the packages grub-pc and grub-efi-amd64 can’t be installed at the same time. To be able to use Calamares Installer on non-efi computers grub-pc has to be installed.

SCREENSHOTS
1. The Plasma Desktop 
2. Running in VirtualBox
3. Running in VMware
4. Watch a movie about the Calamares installation process of DebEX KDE in VirtualBox

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at

raspex.exton.se – latest is RaspAnd Oreo 8.1!

exton, Exton Linux distributions, LINUX

ExTiX 18.8 with Deepin 15.5 Desktop, Refracta snapshot, Calamares 3.1.12 Installer and kernel 4.18.0-rc5-extix – Build 180807

Leave a comment

NEWS about ExTiX 18.8 Deepin 180807
I’ve released a new version of ExTiX 18.8 Deepin today with Calamares 3.1.12 and kernel 4.18.0-rc5-extix. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. All packages have been updated to the latest available version as of today. Study all installed packages in ExTiX Deepin Build 180807. ExTiX is based on Debian and Ubuntu 18.04.1.

About ExTiX 18.8 with the Deepin 15.5 Desktop
I’ve made a new extra version of ExTiX with Deepin 15.5 Desktop (made in China!). Deepin is devoted to providing a beautiful, easy to use, safe and reliable system for global users. Only a minimum of packages are installed in ExTiX Deepin. You can of course install all packages you want. Even while running ExTiX Deepin live. I.e. from a DVD or USB stick. Study all installed packages in ExTiX Deepin.

Refracta Tools
While running ExTiX Deepin 18.8 live or from hard drive you can use Refracta Tools (pre-installed) to create your own live installable Ubuntu system. A ten year child can do it!

About Calamares Installer
Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. Calamares aims to be easy, usable, beautiful, pragmatic, inclusive and distribution-agnostic. Calamares includes an advanced partitioning feature, with support for both manual and automated partitioning operations. It is the first installer with an automated “Replace Partition” option, which makes it easy to reuse a partition over and over for distribution testing. Watch a movie when I’ve started to install ExTiX Deepin using Calamares. See also a slideshow below showing the whole Calamares install process.

Using Calamares you can choose language when the installation starts. When it’s ready everything will be in your chosen language!

Used KERNEL
My special kernel 4.18.0-rc5-extix+ corresponding Kernel.org’s kernel 4.18-rc5. You can download “my” kernel if you want to use it another Ubuntu/Debian system. My kernel is patched so that you can install Nvidia’s proprietary graphics driver if you like.

What’s new in Linux kernel 4.18?

SCREENSHOTS
1. ExTiX Deepin 15.5 Desktop
2. ExTiX Deepin being installed in VirtualBox using Refracta Installer
3. ExTiX Deepin running Refracta snapshot
4. ExTiX Deepin running in VMware
5. ExTiX Deepin running the Refracta Installer
6. ExTiX Deepin login screen (LightDM)
7. Movie showing how to enable Window effects
8. A small movie made with Deepin Screen Recorder

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at

raspex.exton.se – latest is RaspAnd Oreo 8.1!

exton, Exton Linux distributions, LINUX

ExTiX 18.7 – “The Ultimate Linux System” – with LXQt 0.12.0, Refracta Tools, Calamares Installer and kernel 4.18.0-rc5-extix – Build 180723

2 Comments

I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 18.7 LXQt Live DVD. (The previous version was 18.4 from 180419).

ABOUT
ExTiX 18.7 LXQt DVD 64 bit is based on Debian 9 Stretch and Ubuntu 18.04.1 Bionic Beaver. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.12.0. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.18.0-rc5-extix corresponding Kernel.org’s unstable kernel 4.18-rc5. You can download “my” kernel if you want to use it another Ubuntu/Debian system.

What’s new in kernel 4.18?

NEWS ABOUT ExTiX 18.7 Build 180723 with the LXQt Desktop environment
1. ExTiX LXQt is based on Ubuntu 18.04.1 Bionic Beaver. LXQt 0.12.0 is used as Desktop environment. All packages have been updated to the latest version by 180723. Kernel 4.18.0-rc5-extix is used. (Kernel.org‘s kernel 4.18-rc5).
2. Firefox has replaced Google Chrome as Web Browser. It’s now possible to watch Netflix movies also in Firefox (while running Linux).
3. I have replaced Ubuntu’s installer Ubiquity with Calamares Installer. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases.
4. Other included important/useful packages are: LibreOffice, Thunderbird, GParted, Brasero, SMPlayer, GCC and other compilation tools so that you can install packages from source. Furthermore “all” multimedia codecs. Everything the average Linux user could wish for I would say.

WHAT’S SO SPECIAL about ExTiX and especially the new version from 180723?
1. The ExTiX ISO’s are ISO-hybrids, which means that they can very easily be transferred (copied) to a USB pen drive. You can even run ExTiX from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
2. Another big improvement is that both ExTiX versions can run from RAM. Use Boot alternative 4 (Load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExTiX that way. Running from RAM means that the system will run faster than from DVD or USB stick. Everything will be superfast I would say!
3. All packages have been upgraded to the latest version by 180723.
4. I’ve replaced kernel 4.16.2-exton with kernel 4.18.0-rc5-extix (Kernel.org‘s unstable kernel 4.18-rc5). “My” kernel is patched so that you can install Nvidia’s proprietary graphics driver if you like.

SCREENSHOTS
Screenshot of ExTiX 18.7 Desktop – LXQt 0.12.0
Netflix running in ExTiX 18.7
Refracta tools running while logged in as user live
Connections to Windows computers via PCManFM-qt using Samba
ExTiX running in VMware
ExTiX running in VirtualBox

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!

Android, exton, Exton Linux distributions, LINUX, Raspberry Pi systems

RaspAnd Oreo 8.1 for Raspberry Pi 3 Model B and Model B+ – Build 180717 – with Google Play Store, Aptoide TV and TeamViewer

1 Comment

NEWS 180717: My build of RaspAnd Oreo 8.1 is ready. It’s the first RaspAnd build with Android Oreo 8.1 and the first RaspAnd build to work on the new Raspberry Pi 3 Model B+. All installed apps (including Google Play Services and Google Play Store) have been updated to the latest available version by 180717. Read about all other included apps below. While downloading RaspAnd Oreo 8.1 Build 180717 you will also get RaspAnd Nougat 7.1.2 Build 180529, which works much better than RaspAnd Oreo 8.1.

NEWS later 180717: I’ve also uploaded a mini version of RaspAnd Oreo 8.1. It has only the absolute necessary apps pre-installed. I. e. GAPPS (Google Play Services with Google Play Store) and a Browser – Via Browser (Fast and Light – Geeks Best Choice). Watch a screenshot showing all installed apps in the mini version of RaspAnd Oreo. The mini version of RaspAnd Oreo is somewhat faster than the “big” version. The advantage is also that you can install the apps you really need. REMEMBER: The fewer apps you have installed the faster RaspAnd will run.

MORE ABOUT RaspAnd Oreo
RaspAnd Oreo 8.1 Build 180717 is an Android 8.1 Oreo system which can run on Raspberry Pi 3 Model B and Model B+. I have included the following apps.
1) GAPPS (Google Play Services with Google Play Store) in latest versions.
2) Spotify is not installed. Install version 4.6 via Google Play Store. It works very well!
3) Google Play Games (needed for for example Clash of Clans to run)
4) TeamViewer  – control other computers from your Rpi3!
5) Via Browser
6) Firefox
7) CM Browser
8) Aptoide TV  (for installing new apps which can’t be found on Google Play Store – many many apps can be installed!)
9) ES File Explorer 4.1.7.2 working very well
10) AIDA64
11) Termux 0.60 – a very special terminal. (Use the APT package manager!)
12) Quick Reboot Pro 1.8.4
13) YouTube – unfortunately not all videos will run or they will run with bad video or sound quality (especially if you use the whole screen)

SCREENSHOTS
RaspAnd Oreo’s boot animation
Slideshow – showing RaspAnd’s boot procedure (for RaspAnd Nougat, but…)
Screenshot 2 – RaspAnd’s Desktop
Screenshot 3 – showing all installed apps
Screenshot 4 – Google Play Store running
Screenshot 5 – Spotify running
Screenshot 6 – TeamViewer running and controlling my PC
Screenshot 7 – Developer options
Screenshot 8 – Quick Reboot Pro running
Screenshot 9 – showing all installed apps and extra apps
Screenshot 10 – AIDA64 running
Screenshot 11 – YouTube running with perfect video and sound quality – the small picture/video down to the right

READ MORE…

Android, exton, Exton Linux distributions, LINUX, Raspberry Pi systems

RaspAnd Oreo 8.1 for Raspberry Pi 3 Model B (not B+) – Build 180707 – with Google Play Store, Aptoide TV and TeamViewer

1 Comment

NEWS 180707: My build of RaspAnd Oreo 8.1 is ready. It’s the first RaspAnd build with Android Oreo 8.1. All installed apps (including Google Play Services and Google Play Store) have been updated to the latest available version by 180707. Read about all other included apps below. While downloading RaspAnd Oreo 8.1 Build 180707 you will also get RaspAnd Nougat 7.1.2 Build 180529, which works much better than RaspAnd Oreo 8.1.

RaspAnd Oreo 8.1 Build 180707 can be used with the official Raspberry Pi 7 inch touchscreen and Big TV Screens
Thanks to a member on this site who asked for support for the Raspberry Pi official 7 inch touchscreen I started to experiment with different configurations. Success!

Experimental Build
Build 180707 of RaspAnd can be downloaded for free by those who have purchased RaspAnd Nougat 7.1.2 Build 180529 (and previous versions of RaspAnd 7.1.2). That’s because RaspAnd Oreo 8.1 can be considered as “experimental”. It doesn’t work as good as RaspAnd Nougat. Fewer monitors/TV screens can be used and the performance is slower. You must be aware of the fact that the Raspberry Pi 3 computer has its limitations and that Android Oreo 8.1 is a very advanced Linux system.

MORE ABOUT RaspAnd Oreo
RaspAnd Oreo 8.1 Build 180707 is an Android 8.1 Oreo system which can run on Raspberry Pi 3 Model B. RaspAnd can not yet run on a Raspberry Pi 3 Model B+. I have included the following apps.
1) GAPPS (Google Play Services with Google Play Store) in latest versions.
2) Spotify is not installed. Install version 4.6 via Google Play Store. It works very well!
3) Google Play Games (needed for for example Clash of Clans to run)
4) TeamViewer  – control other computers from your Rpi3!
5) Jelly Browser
6) Aptoide TV  (for installing new apps which can’t be found on Google Play Store – many many apps can be installed!)
7) ES File Explorer 4.1.7.2 working very well
8) AIDA64
9) Termux 0.60 – a very special terminal. (Use the APT package manager!)
10) Quick Reboot Pro 1.8.4
11) YouTube – unfortunately not all videos will run.

ABOUT Android 8.1
Version 8.1 is the latest Android system by now. Released on December 5, 2017.

SCREENSHOTS
RaspAnd Oreo’s boot animation
Slideshow – showing RaspAnd’s boot procedure (for RaspAnd Nougat, but…)
Screenshot 2 – RaspAnd’s Desktop
Screenshot 3 – showing all installed apps
Screenshot 4 – Google Play Store running
Screenshot 5 – Spotify running
Screenshot 6 – TeamViewer running and controlling my PC
Screenshot 7 – Developer options

KNOWN ISSUES re. RaspAnd Build 180707
1. Not all apps will run in RaspAnd Oreo. You can for example run the popular (?) Clash of Clans very well, but not Angry Birds. Many many apps will run without problems though.
2. You can’t run Netflix.
3. Bluetooth doesn’t work.
4. RaspAnd Oreo can not yet run on a Raspberry Pi 3 Model B+.

READ MORE…

Android, exton, Exton Linux distributions, LINUX

AndEX Oreo 8.1 (Android-x86_64) – Build 180614 – with Google Play Store (and everything else) working very well!

Leave a comment

NEWS 180614 about AndEX Oreo 8.1
My first build of AndEX Oreo 8.1 is from 180103. My second build is from 180202. My new build of Android x86_64 – andex_x86_64-oreo-8.1-gapps-windows-launchers-1050mb-180614.iso can be installed (manually) to hard drive or on a USB stick. You can also run the system live. I.e. from a DVD or a USB stick. On some computers you’ll have to start up AndEX 8.1 in compatibility mode (VESA) though. NOTE: You can run AndEX Oreo Build 180614 on newer laptops and Desktop computers. The sound and the video performance is generally very very good.

MOST IMPORTANT CHANGES IN BUILD 180614
Google Play Store now works as intended. As an alternative you can use Aptoide App Manager. Aptoide is not pre-installed, but you can very easy install it. Two nice special window launchers are pre-installed: Microsoft Launcher and OO Launcher. (OO Launcher is an enhanced Android™ O Oreo™ style launcher, with many useful enhanced launcher features). I’ve discovered a new way to manually install AndEX Oreo to hard drive. Very simple! Read more about it at the INFO site. You can now open up a terminal and become root with the command su root (which you couldn’t in previous versions of AndEX Oreo). Build 180614 uses kernel 4.9.95 with more support for various hardware.

Screenshot – AndEX Build 180614 – the Desktop with Win 10 Launcher for Android 8.1 Oreo – with several extra apps (games) – Koi Video Live Wallpaper, Air Fighters, Popcorn Time, Wild Hunt, Racing In Car 2, Drift Clash and Fishing Club 3D – not pre-installed.

MORE NEWS 180614: AndEX – Oreo 8.1 with kernel 4.9.95-exton-android-x86_64 and GAPPS
My new build of Android-x86_64 Oreo 8.1 have GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Google Play Games and YouTube. Also many other apps. For example: Spotify, ES File Explorer, Firefox, Root Explorer, Control Screen Orientation and Clash of Clans.

Screenshots
Screenshot 1 – AndEX Oreo 8.1 Desktop with Microsoft Launcher
Screenshot 2 – AndEX Oreo 8.1 Desktop with Microsoft Launcher – all apps
Screenshot 3 – AndEX Oreo 8.1 with Win 10 Launcher (not pre-installed)
Screenshot 4 – AndEX Oreo 8.1 running in VMware

READ MORE…

exton, Exton Linux distributions, LINUX

ExTiX 18.6, Build 180602, with KDE 4.16.12 together with KDE Frameworks 5.44.0, Refracta Tools and kernel 4.15.0-23-exton

Leave a comment

I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 18.6 KDE Live DVD. (The previous version was 17.5 from 170508). The best thing with ExTiX 18.6 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Tools (pre-installed) to create your own live installable Ubuntu system. So easy that a ten year child can do it!

ABOUT
ExTiX 18.6 KDE DVD 64 bit is based on Debian 9 and Ubuntu 18.04 LTS. The original system includes the Desktop Environment Unity (Ubuntu). After removing Unity I have installed KDE Frameworks 5.44.0 with KDE 4.16.12. KDE Frameworks are 60 addon libraries to Qt which provide a wide variety of commonly needed functionality in mature, peer reviewed and well tested libraries with friendly licensing terms.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.15.0-23-exton.

What’s new in Linux kernel 4.15?

NEWS ABOUT ExTiX 18.6 Build 180602 with the KDE Desktop environment and Refracta Tools
1. ExTiX KDE is based on Ubuntu 18.04 LTS Bionic Beaver. KDE 4.16.12 is used as Desktop environment. All packages have been updated to the latest version by 180602. Kernel 4.15.0-23-exton is used.
2. I have removed Google Chrome. It is now possible to watch Netflix movies in Firefox.
3. I have installed BlueGriffon Web Editor. BlueGriffon is a new WYSIWYG content editor for the World Wide Web. Powered by Gecko, the rendering engine of Firefox, it’s a modern and robust solution to edit Web pages in conformance to the latest Web Standards. Only to be compared with Dreamweaver. (In my opinion).
4. Other included important/useful packages are: LibreOffice, Thunderbird, GParted, Brasero, SMPlayer, GCC and other compilation tools so that you can install packages from source. Furthermore “all” multimedia codecs. Everything the average Linux user could wish for I would say.
5. The best thing with ExTiX 18.6 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Tools (pre-installed) to create your own live installable Ubuntu system. Very easy to do.

SCREENSHOTS
Screenshot 1 of ExTiX 18.6 Desktop – logged in as the ordinary user extix
Screenshot 2 of ExTiX 18.6 Desktop – logged in as root (superuser)
Screenshot 3 of ExTiX 18.6 Desktop – running in VirtualBox
Screenshot 4 of ExTiX 18.6 Desktop – running in VMware

READ MORE…

About all Exton Linux distributions