All posts by exton

LFA (Linux For All) 64bit Live DVD Build 221008 with kernel 6.0.0-amd64-exton :: Create you own LFA/Ubuntu installable 22.04.1 LTS system!

Linux For All (LFA) Build 221008 with Gnome 42.4
is a simple remaster of Ubuntu 22.04, code-named Jammy Jellyfish. It’s a total rebuild. I.e. nothing is left of the old LFA system. NOTE: Ubuntu 22.04 will be supported until April 2027.

NEWS ABOUT LFA Build 221008

1. All packages the ordinary Linux user can wish for are pre-installed. Study the full packages list.
2. Kernel 6.0.0-amd64-exton (with Debian patches) is used. You can of course switch to Ubuntu’s original kernel if you prefer.
3. The Desktop environment is Gnome 42.4. (Ubuntu’s original DE).
4. The main Web Browser is Firefox. So you can watch Netflix!
5. I have included Refracta tools (Refracta Snapshot) to make it possible for you to create your own installable Ubuntu 22.04.1 Live DVD once you have installed LFA to hard drive.
6. You can run LFA fast in RAM. Use boot alternative 2 Load to RAM – see below. The LFA ISO file is of only 1490 MB to be compared with Ubuntu’s original ISO of 2900 MB.
7. VirtualBox Guest Additions are pre-installed , which means (among other things) that you can run LFA in VirtualBox in full screen. Watch this screenshot.

What’s new in kernel 6.0?

SCREENSHOTS
Screenshot 1 – Installing Grub using Refracta Installer
Screenshot 2 – Running Samba to reach Windows computers
Screenshot 3 – Refracta Installer has started
Screenshot 4 – Running Refracta Installer and keeping the user account
Screenshot 5 – Running in full screen in VirtualBox

READ MORE….

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

DebEX KDE Plasma, Build 220929, with kernel 6.0.0-rc6-exton and Refracta Snapshot

NEWS 220929 about DebEX KDE Plasma – a Refracta Build
I have made a new version of DebEX KDE Plasma Live DVDefi. It replaces version 211023. It’s a pure Debian 11 system. (Stable). I.e.: There are no Ubuntu or Kubuntu elements involved. DebEX KDE Plasma uses the KDE Plasma Desktop 5.20.5 as Desktop environment. Kernel 6.0.0-rc6-exton is used. I have replaced Wicd with NetworkManager. It works better. I have replaced Google Chrome with Firefox-ESR/Iceweasel 102.3 (for Netflix). I’ve also added SMPlayer – an alternative to Vlc. (SMPlayer is a free media player for Windows and Linux with built-in codecs that can play virtually all video and audio formats. It doesn’t need any external codecs. Just install SMPlayer and you’ll be able to play all formats without the hassle to find and install codec packs). All other installed packages have also been updated to the latest version of 220929. Study the full package list.

MOST IMPORTANT CHANGES
A) I’ve installed the full KDE Plasma Desktop using the command sudo apt install task-kde-desktop. In order to save space I have removed LibreOffice with the command sudo apt remove libreoffice*
B) I have added Calamares 3.2.36.1 Installer Framework. Now you can choose language when the installation starts. When it’s ready everything will be in your chosen language! You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers if you follow my INSTRUCTION for non-efi computers. Or don’t do that. Just start Calamares and choose to install Grub in MBR. It works very well!
NOTE: You can also use Refracta Installer. Preferably in VirtualBox/VMware. NOTE ALSO: When running DebEX KDE in VirtualBox you can do it in full screen since VirtualBox Guest Additions are pre-installed. Watch this screenshot.

THE REAL McCoy
DebEX is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian. So is DebEX.

SCREENSHOTS
1. The ordinary user Desktop
2. Root’s Desktop
3. Running DebEX in full screen in VirtualBox

READ MORE….

 

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

ExTiX 22.9 KDE Plasma together with Anbox (“Android in a Box” with Google Play Store pre-installed) :: Build 220922

ABOUT ExTiX 22.9 – Build 220922
I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 22.9 KDE Anbox Live DVD. (The previous KDE/Anbox version was 21.10 from 211007). I have now included Anbox (Android in a Box – Anbox puts the Android operating system into a container, abstracts hardware access and integrates core system services into a GNU/Linux system. Every Android application will be integrated with your operating system like any other native application). So now you can run Android apps in ExTiX. GAPPS (Google Play Services and Google Play Store) are pre-installed in ExTiX 22.9. The second best thing with ExTiX 22.9 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu/Anbox system. So easy that a ten year child can do it!

ExTiX 22.9 KDE Plasma DVD 64 bit is based on Debian and Ubuntu 22.04.1 LTS. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed KDE Frameworks 5.92.0 with KDE Plasma 5.24.6. KDE Frameworks are 60 addon libraries to Qt which provide a wide variety of commonly needed functionality in mature, peer reviewed and well tested libraries with friendly licensing terms.

The system language is ENGLISH.

Used KERNEL
Ubuntu’s latest original kernel 5.15.0-47 with binder and ashmem kernel modules needed by Anbox.

NEWS ABOUT ExTiX 22.9 Build 220922 with the KDE Plasma Desktop environment together with Anbox (Android in a Box), Refracta Installer and Refracta Snapshot
1. ExTiX KDE Plasma is based on Ubuntu 22.04.1 LTS Jammy Jellyfish. KDE Plasma is used as Desktop environment together with Anbox (Android in a Box). All packages have been updated to the latest version by 220922.
2. I have pre-installed Anbox (Android in a Box) with Google Play Store. So GAPPS (Google Play Services and Google Play Store) are pre-installed in this version of ExTiX. Anbox won’t run live (from a DVD or a USB stick) or in VirtualBox. You will get this error message. That’s because VirtualBox as of yet does NOT support nested virtualization. In this version of ExTiX KDE/Anbox you can run the YouTube app with good video and sound quality. Not with the very best quality, but…
IMPORTANT NOTE: On some computers you may not be able to start Anbox from the menu. If that is the case you shall open up a terminal and run the following two commands:
snap disable anbox && snap enable anbox FOLLOWED by:
EGL_PLATFORM=x11 anbox.appmgr
Or maybe this command on certain computers: DRI_PRIME=1 anbox.appmgr
3. Other included important/useful packages are: GParted GCC and other compilation tools so that you can install packages from source. Furthermore “all” multimedia codecs. Everything the average Linux user could wish for I would say.
4. VirtualBox Guest Additions are pre-installed, which means (among other things) that you can run ExTiX 22.9 in full screen in VirtualBox. Watch this screenshot.
5. The second best thing with ExTiX 22.9 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu system. Very easy to do. When starting Refracta Snapshot you will see this.

SCREENSHOTS
1. ExTiX Desktop with Anbox running 220922
2. Login to Google Play Store
3. Anbox with Google Play Store running
4. A chess game running in Anbox
5. Anbox running in full screen
6. Spotify is running in Anbox
7. ExTiX 22.9 running in full screen in VirtualBox

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

How to (force) install Windows 11 on an old computer

HOW TO INSTALL WINDOWS 11 ON AN OLD COMPUTER THAT DOES NOT MEET MICROSOFT’S REQUIREMENTS FOR NEWER HARDWARE

I have 5 – 10 Linux systems installed on my four computers along with Windows. It is fine to “multi-boot” all systems. I have made an instruction for this, which I call “How-to dual-boot, triple-boot or multi-boot Linux with Windows in a simple way and be happy“.
Two of my computers are purchased with Windows 11 pre-installed. My other two computers do not meet Microsoft’s “official” requirements to install or run Windows 11.

Now, however, I have found a script that enables installations of Windows 11 on computers that do not by any means meet Microsoft’s requirements for hardware. A prerequisite is that Windows 10 is installed on the computer in question and that the license is valid. It’s all quite simple. Do this:


1. Download and install 7-Zip. Current script requires 7-Zip to be installed.


2. Create a Windows 11 ISO file using MediaCreationToolW11.exe.

So select “Create Windows 11 Installation Media”. Important!

3. Download the miracle script “Force-Windows-11-Install“.


4. Follow the instructions in the YouTube video “Install Windows 11 on Anything!!!

A) Put the created ISO file into the unzipped Force-Windows-11-Install-main.zip (Force-Windows-11-Install-main).

B) Double-click env.bat in the Force-Windows-11-Install-main folder. A PowerShell window will then open. You are then in the Force-Windows-11-Install-main folder.


C) Type the command: Set-ExecutionPolicy -ExecutionPolicy Unrestricted

Then press ENTER

D) Type the command: .\Win11-TPM-RegBypass.ps1 -Source “Windows.iso” -Destination “Win11-New.iso”

Then press ENTER

E) The new ISO file Win11-New.iso is now created. Wait until you get a message that the ISO file is ready. At the end, a new terminal window will open. Don’t close it!


F) Once the ISO file is ready, run one last command:
.\Win11-TPM-RegBypass.ps1 -PrepareUpgrade
Then press ENTER again and respond with R (run once). After that, you can close the PowerShell window.

G) Now you will do the actual installation. First, open the new ISO file Win11-New.iso (which should be in the folder Force-Windows-11-Install-main). Double-click setup (setup.exe) and the installation will start.

Follow the instructions. The computer will restart a number of times during the installation.

I have recently used the script on two of my older computers. Everything worked perfectly. Windows 11 is even faster on these computers than Windows 10 was. Microsoft’s hardware requirements for Windows 11 therefore do not seem particularly justified.

The image below shows how it looked on one of my computers when the script was running.

ArchEX (Arch Linux) “Mini” with LXQt 1.1.0, all Arch Linux installation scripts, VirtualBox Guest Additions and kernel 5.19.6 (latest) :: Build 220904

NEWS ABOUT ArchEX 220904
I’ve made a new extra “Mini” version of ArchEX. It has four advantages compared with ArchEX Build 220901.

A) This ArchEX build is smaller. The ISO file is “only” of 1740 MB compered with Build 220901 which is of 4010 MB. This is of importance since ArchEX can run very fast live from RAM. So your computer needs lesser RAM to run Build 220904. Should be enough with 2 GB. NOTE: I was hoping to make the ISO file even smaller, but that was impossible since Calamares Installer has a lot of dependencies.

B) ArchEX Build 220904 has all Arch Linux original installation scripts, which means that you can use this build to install Arch Linux “the Arch way” following the Installation Guide. Or you can just follow my example here. You can have my instructions up in Firefox while installing as this screenshot shows. When installing from Arch Linux official live DVD you’ll have to do it in console mode. (Could be tricky).

C) If you install Arch Linux (or ArchEX using Calamares) in VirtualBox or Qemu you can do it in full screen. VirtualBox Guest Additions are pre-installed in ArchEX Build 220904 (and Build 220901). Watch this screenshot. In Qemu you can just choose the screen resolution you want.

D) ArchEX Build 220904 uses kernel 5.19.6 (latest) and has support for more wireless cards. Kernel modules ath10k and wl are loaded also when running ArchEX live, which obviously means a lot.

Study all installed packages in Build 220904…

SCREENSHOTS

1. ArchEX Mini Desktop for user exton
2. ArchEX Mini Desktop for root
3. ArchEX Mini installing LibreOffice while running live
4. Installing Arch Linux the Arch way

READ MORE about both ArchEX versions…

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

ArchEX (Arch Linux) Live with Deepin 20.7, GNOME 42, Gnome Classic, LXQt 1.1.0, LXDE, kernel 5.19.5-arch1-1, Yay, Spotify and Calamares Installer – Build 220905 and 220904

NEWS ABOUT ArchEX 220905
Today I discovered that I had forgot to add “cowspace” (sudo mount -o remount,size=2G /run/archiso/cowspace) in ArchEX Build 220901. I therefore had to upload a new ArchEX version today (220905). This version uses kernel 5.19.6 and has more support for various wireless cards.

NEWS about ArchEX 220901
A new version of ArchEX is ready! In this new version, which I call ArchEX 2022, I have added the Deepin 20.7 (latest) Desktop Environment (DE). Deepin DE (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin DE very much when I installed it in ExTiX 22.6. So I thought why not install Deepin DE also in ArchEX? Furthermore I have added the GNOME 42 (latest) and LXQt 1.1.0-1 (latest) Desktop environments. As “extra” Desktop environments I’ve added Gnome Classic and LXDE. So altogether five (5) different Desktops environments to try out while running ArchEX live or from hard drive! Note that you can run ArchEX in full screen in VirtualBox directly from the ISO file since VirtualBox Guest Additions are pre-installed!

Study all installed packages in ArchEX 2022 with Deepin/GNOME 42/Gnome Classic/LXQt/LXDE.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.  You can very easy install ArchEX to hard drive in any language using Calamares Installer. Also in VirtualBox/VMware without any hassle.

Screenshots
ArchEX Deepin Desktop
ArchEX GNOME 42 Desktop
ArchEX LXQt Desktop
ArchEX LXDE Desktop
ArchEX Gnome Classic Desktop

ArchEX Deepin full Desktop running in VMware

READ MORE…

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

ExTiX 22.8 – “The Ultimate Linux System” – based on Ubuntu 22.04.1 LTS with LXQt 0.17, Refracta Snapshot and kernel 5.19.0-amd64-exton :: Build 220814

ExTiX 22.8 LXQt – Build 220814
I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 22.8 LXQt Live DVD. (The previous LXQt version was 21.11 from 211030). ExTiX 22.8 is based on Ubuntu 22.04.1 LTS (Jammy Jellyfish)! Ubuntu 22.04 will be supported until 2027. The best thing with ExTiX 22.8 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu system. So easy that a ten year child can do it! One other very good thing with this version of ExTiX is that it is quite light. The ISO file is of only 1820 MB, which means that you can run the system super fast from RAM. When the boot process is ready you can eject the DVD or USB stick. Use Boot alternative 3 or Advanced options… >> load to RAM.

ABOUT
ExTiX 22.8
LXQt DVD 64 bit is based on Debian Sid and Ubuntu 22.04.1 LTS. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.17. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for installation to UEFI-enabled computers. You shall use Refracta Installer for that.

The system language is ENGLISH.

SCREENSHOTS
1. ExTiX LXQt – root’s Desktop
2. ExTiX LXQt – live’s Desktop
3. WiFi connection
4. ExTiX 22.8 running in full screen in VirtualBox

READ MORE…

 

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

PuppEX Bookworm64 with Tint2 as DE :: Build 220807

NEWS ABOUT PuppEX Bookworm64 Build 220807
My new Puppy Linux derivative is built using the Bookworm Build Script. It is compatible with Debian Bookworm – upcoming Debian 12. This version of PuppEX uses Tint2 as Desktop environment (DE). It is for UEFI computers and non-UEFI computers. This PuppEX version runs very well in VirtualBox/VMware. You can run it in full screen in VirtualBox, since VirtualBox Guest Additions are pre-installed. Watch this screenshot…

Debian 12
Compatible with Debian 12
means that you can use the apt command. (apt update, apt upgrade, apt install MyUsefulPackage etc) and Synaptic for installing thousands of new Debian packages in PuppEX. All PuppEX Bookworm64 versions can easily be installed manually to hard drive if you have at least one Linux system installed. You must also use Grub as boot loader. Read more about how to do that at the INFO site.

SCREENSHOTS
1. PuppEX Bookworm64 running in full screen in VirtualBox
2. Connection to a wireless network
3. root’s desktop – Tint2
4. puppy’s desktop – Tint2
5. Using CIFS to reach Windows shares

READ MORE or download the ISO right away from the Swedish Linux Society’s server…

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

ExLight 64bit UEFI, Build 220726, based on Debian “Sid” (unstable/development) with Enlightenment 0.25.3 (latest) as DE, Refracta Snapshot and Calamares Installer

NEWS 220726 ABOUT ExLight
I’ve made a new version of ExLight with the Enlightenment 0.25.3 Desktop environment, Refracta Snapshot (create your own Debian Sid System) and Calamares 3.2.60-1 Installer Framework. The very nice Enlightenment theme e25 Neonz is used.

KERNEL
ExLight Build 220726 uses Debian’s original kernel 5.18.0-2-amd64.

VirtualBox and VMware
ExLight Build 220726 runs very well in VirtualBox and VMware. Maybe you’ll have to use boot alternative 4 (failsafe). You can use Calamares Installer also in VirtualBox and VMware without any problems.VirtualBox Guest Additions are pre-installed. Watch a screenshot when ExLight is running in full screen in VirtualBox.

THE REAL McCoy
ExLight is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian. So is ExLight.

SCREENSHOTS
1. The Enlightenment 0.25.3 Desktop for user user
2. The Enlightenment 0.25.3 Desktop for root running Refracta Snapshot

3. Running ExLight in full screen in VirtualBox
4. Using NetworkManager for WiFi connections
5. Refracta Snapshot has started
6. Running Calamares Installer

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

PuppEX Bookworm64 (Puppy Linux) compatible with Debian Bookworm (upcoming Debian 12) :: Build 220714

NEWS ABOUT PuppEX Bookworm64 Build 220714 – TWO versions
My two new Puppy Linux derivatives are built using the Bookworm Build Script. They are compatible with Debian Bookworm – upcoming Debian 12. One version of 1070 MB (the ISO file) is for UEFI computers. The other one of 903 MB (the ISO file) is for non-UEFI computers and VirtualBox/VMware. The non-UEFI version can run i full screen in VirtualBox, since VirtualBox Guest Additions are pre-installed. Watch this screenshot…

Debian 12
Compatible with Debian 12
means that you can use the apt command. (apt update, apt upgrade, apt install MyUsefulPackage etc) and Synaptic for installing thousands of new Debian packages in PuppEX. Both PuppEX Bookworm64 versions can easily be installed manually to hard drive if you have at least one Linux system installed. You must also use Grub as boot loader. Read more about how to do that at the INFO site.

SCREENSHOTS
1. PuppEX Bookworm64 running in full screen in VirtualBox
2. Connection to a wireless network
3. Running Netflix in Firefox
4. Using Samba to reach my Windows computers
5. Using Quick Remaster GUI

READ MORE…

Read about my Android-x86 Systems – 11; 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!